Flash Tizen 2.2 Image to Reference Device

From Tizen Wiki
Revision as of 20:47, 21 July 2013 by Leon (talk | contribs) (Troubleshooting)
Jump to: navigation, search

Requirements

Installation

For RD-PQ

  1. Download following System and Platform images (with enabled WiFi):
    http://download.tizen.org/releases/system/Tizen_RD-PQ_System_20130626_1.tar #System files
    http://download.tizen.org/releases/2.2b/RD-PQ-REF/tizen-2.2_20130701.5_RD-PQ-REF_wifi.tar.gz #Reference Appliaction Preloaded
  2. Flashing System Image
    lthor Tizen_RD-PQ_System_20130626_1.tar
  3. Flashing Platform Image
    lthor tizen-2.2_20130701.5_RD-PQ-REF_wifi.tar.gz

Post Flash Guide

The device will be automatically rebooted after successful installation. Please note that Tizen 2.2 does not contain the hardware acceleration binaries so they must be downloaded and installed manually.

Mali DDK for Tizen 2.2 is available HERE.

Note: Mali DDK in official guide[1] is not compatible with Tizen 2.2.

Enable 3D Acceleration on Tizen

Troubleshooting

  • lthor

If you are unable to connect lthor to the device on Ubuntu (12.10 or 13.04) please follow the instructions to solve the issue.

  • enlightenment has closed unexpectedly

This error message may occur on start-up if Mali DDK binaries for Tizen 2.0 Magnolia have been installed on Tizen 2.2. To platform image has to be flashed again to fix the issue.

  • Cannot write file to the target/emulator file system

If you want to write some files to target or emulator file system, run sdb with "root on" parameter.
Target : sdb -d root on
Emulator : sdb -e root on

  • A mistake was made while downloading image

Connect the USB cable to the device when this error message is displayed. The Device will get into download mode.

See Also